E-Bike 36V Specifications Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
8
Battery Charge Level
The three state-of-charge LEDs (D, Figure 1) on the throttle
controller indicate the battery charge level.
Green (or full) indicates the battery is 100% to 80%
charged.
Green and yellow indicate the battery is 80% to 60%
charged.
Yellow (or half) indicates the battery is 60% to 40%
charged.
Yellow and red indicate the battery is 40% to 15%
charged.
Red (or empty) indicates the battery is 15% to 5%
charged (low battery condition).
Red LED flashes indicates the battery is less than 5%
charged (very low battery condition).
The motor automatically shuts off when the battery is below
a preset limit to help extend battery life. The red LED flashes
to signify the motor is off and the battery must be recharged.
Recharge the battery pack immediately after use. Failure to
do so within 72 hrs may damage the battery.
WARNING:
The right hand lever activates the front brake on the E-
Bike™. This is the OPPOSITE of a traditional bicycle.
LEFT HAND CONTROLS
Performance or Economy Switch (P/E)
The Blue P /E switch (A, Figure 2) provides two different
power delivery characteristics. In the Performance or P-
mode, your E-Bike™ has maximum hill climbing capability
and acceleration. Total range, however, is shorter because
power usage will be greater.
In the Economy or E-mode, your E-Bike™ has lower top
speed, lower hill climbing capability, and accelerates more
slowly. Total range is longer because power usage is less.
F
G
E
D
C
B
A
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 48 49

Comments to this Manuals

No comments