E-Bike 36V Specifications download pdf (Page 10)

CODE MEANING BEEP LEDs

Overheat The motor or control- Bad beep Yellow LED

condition ler temperature flashes.

exceeds operating

temperature. The con-

troller cuts the power

to the motor. You must

pedal until the tempera-

ture drops to operating

temperature.

Operating The motor or controller Good Beep The appropriate

temperature has cooled to operating state-of-charge

temperature.You may LED turns on.

resume using the throttle.

Overheat and The motor or controller Bad beep The yellow and

low-battery temperature exceeds red LEDs flash

condition operating temperature simultaneously.

and the battery

state-of-charge is low.

Throttle

Press the throttle lever (B, Figure 1) with your thumb to apply

power to the motor.

Front Brake Lever

The front brake is activated by squeezing the right brake lever

(C, Figure 1). This is the opposite of a traditional bicycle.

RIGHT HAND CONTROLS

Power On/Off

• Turn the power knob (A, Figure 1) on the throttle

controller clockwise to the ON position.

• The three state-of-charge LEDs will flash

simultaneously three times and the good beep will

sound to indicate the system and controls are ready for

operation.

FIG.1

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 48 49

No comments

E-Bike 36V Specifications Page 10